Stef's beam builds

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Stef's beam builds
#61
Are you able to offer a rebuilt beam without taking an old one in part exchange for a higher price?
This post is an artistic work of fiction and falsehood. Only a fool would take anything posted above as fact.

62k Diablo Phase 1 Gti-6:
Project Thread
Reply
Thanks given by:
#62
Yes I dont see why not.
90' 205 gti6 supercharged
05' Evo 9 IX GT

Team eaton.


Axle rebuilds please contact me for your needs.

https://www.facebook.com/axlesbystef/
Reply
Thanks given by:
#63
i'd be interested in a beam for my hdi (abs), but it'd have to wait til next year.
ideally, i'd like the refurb unit sent b4 returning the OE one, so that I can take it to KrisB for fitting.
is that a reasonable ask?
It goes, it stops (as reqd). Makeup
Hate Housework!
Reply
Thanks given by:
#64
i dont stock many axles so we will have to work something out near the time.
90' 205 gti6 supercharged
05' Evo 9 IX GT

Team eaton.


Axle rebuilds please contact me for your needs.

https://www.facebook.com/axlesbystef/
Reply
Thanks given by:
#65
(24-10-2015, 10:38 AM)Stef205 Wrote: i dont stock many axles so we will have to work something out near the time.

happy with that Smile
It goes, it stops (as reqd). Makeup
Hate Housework!
Reply
Thanks given by:
#66
(24-10-2015, 09:42 AM)Stef205 Wrote: Yes I dont see why not.

Great. I might be in touch over the winter.
This post is an artistic work of fiction and falsehood. Only a fool would take anything posted above as fact.

62k Diablo Phase 1 Gti-6:
Project Thread
Reply
Thanks given by:
#67
Quick bump

Still doing these Smile
90' 205 gti6 supercharged
05' Evo 9 IX GT

Team eaton.


Axle rebuilds please contact me for your needs.

https://www.facebook.com/axlesbystef/
Reply
Thanks given by:
#68
fab, i'll be in touch in a month or two
It goes, it stops (as reqd). Makeup
Hate Housework!
Reply
Thanks given by:
#69
I can recommend stef for work he did on my beam
replacing T bars and height adjustment Wink

https://www.check-mot.service.gov.uk/
GTI6 Info

Don’t drive faster than your guardian angel can fly.

Reply
Thanks given by:
#70
Few messages lately about beams, Yes i am still doing them currently on a break as ive taken on a huge welding job which is taking all of my free time and wouldnt be fair to others to take on beam work. Will update when im all good again Smile

Stef Smile
90' 205 gti6 supercharged
05' Evo 9 IX GT

Team eaton.


Axle rebuilds please contact me for your needs.

https://www.facebook.com/axlesbystef/
Reply
Thanks given by:
#71
No worries Stef. Let me know when you are back on with them and I'll buy one. I also need a 205 GTI subframe if you've hot any?
Reply
Thanks given by:
#72
Sorry mate I'll reply to your message now
90' 205 gti6 supercharged
05' Evo 9 IX GT

Team eaton.


Axle rebuilds please contact me for your needs.

https://www.facebook.com/axlesbystef/
Reply
Thanks given by:
#73
Forgot to update this.

I am now back to normal and beam builds are flowing again. My rebuilds still use oem parts and include new bolts and now all parts are shot blasted as standard! Price still remains at £280 for you guys.

Stef Smile
90' 205 gti6 supercharged
05' Evo 9 IX GT

Team eaton.


Axle rebuilds please contact me for your needs.

https://www.facebook.com/axlesbystef/
Reply
Thanks given by:
#74
Had to swap a leaking shock on my beam today, was a pleasure stripping it off with the new bolts you put in, thank good you used a 22mm not 21 lol


Sent from my iPhone using Tapatalk
Reply
Thanks given by:
#75
(29-08-2016, 11:26 PM)rocker8742 Wrote: Had to swap a leaking shock on my beam today, was a pleasure stripping it off with the new bolts you put in, thank good you used a 22mm not 21 lol


Sent from my iPhone using Tapatalk

Ha! the amount of people that praise the new bolts. In my eyes its a good finishing touch.
90' 205 gti6 supercharged
05' Evo 9 IX GT

Team eaton.


Axle rebuilds please contact me for your needs.

https://www.facebook.com/axlesbystef/
Reply
Thanks given by:
#76
(30-08-2016, 08:22 AM)Stef205 Wrote:
(29-08-2016, 11:26 PM)rocker8742 Wrote: Had to swap a leaking shock on my beam today, was a pleasure stripping it off with the new bolts you put in, thank good you used a 22mm not 21 lol


Sent from my iPhone using Tapatalk

Ha! the amount of people that praise the new bolts. In my eyes its a good finishing touch.


I think it's worth while with any replacement part tbh mate, makes life so much easier if you ever come back to it.


Sent from my iPhone using Tapatalk
Reply
Thanks given by:
#77
will have a gti6 axle available soon, Normal spec and build. Will be set to oem height unless sold before its built then will set to buyers requirements.
All oem parts and new bolts as standard. £280 on exchange, Exchange units MUST be in a serviceable condition.

Stef Smile
90' 205 gti6 supercharged
05' Evo 9 IX GT

Team eaton.


Axle rebuilds please contact me for your needs.

https://www.facebook.com/axlesbystef/
Reply
Thanks given by:
#78
think my original beam may be seized.
It goes, it stops (as reqd). Makeup
Hate Housework!
Reply
Thanks given by:
#79
Seized 306 beams are getting as common as the 205/309 stuff now. Ripe for the bin tbh
90' 205 gti6 supercharged
05' Evo 9 IX GT

Team eaton.


Axle rebuilds please contact me for your needs.

https://www.facebook.com/axlesbystef/
Reply
Thanks given by:
#80
darn.!
what's the best way to determine?
It goes, it stops (as reqd). Makeup
Hate Housework!
Reply
Thanks given by:
#81
Bounce the car see if it moves.
90' 205 gti6 supercharged
05' Evo 9 IX GT

Team eaton.


Axle rebuilds please contact me for your needs.

https://www.facebook.com/axlesbystef/
Reply
Thanks given by:
#82
it's off the car, swapped with a used one I had.
It goes, it stops (as reqd). Makeup
Hate Housework!
Reply
Thanks given by:
#83
pull it apart.

I had a 205 beam which was meant to have been built by a well known beam builder.

one side was seized, thankfully it came apart and we could use the arms, all 4 bearings had been installed back to front and too deep, seal clearances way too tight, and deep wear grooves under the outer bearings!!
need a part number? http://public.servicebox.peugeot.com/ and http://service.citroen.com/ will sort you out.
Reply
Thanks given by:
#84
next spring then - - - - maybe
It goes, it stops (as reqd). Makeup
Hate Housework!
Reply
Thanks given by:
#85
available soon

Xsara vts axle

Good upgrade over the standard gti6 beam.
£300 on exchange of another vts axle
£350 on exchange with a gti spec axle
£380 straight buy out!

Stef Smile
90' 205 gti6 supercharged
05' Evo 9 IX GT

Team eaton.


Axle rebuilds please contact me for your needs.

https://www.facebook.com/axlesbystef/
Reply
Thanks given by:
#86
Hi all,

I can now supply bigger dia bars. Prices below.

All Torsion Bars below 25mm
£280.00 per set
All Anti Roll Bars below 25mm
£145.00 each
 
Torsion Bars above 25mm
£300.00 per set
Anti Roll Bars above 25mm
£175.00 each
Hybrid Anti Roll Bars (306)
£185.00 each
 
Prices are plus post.

Stef Smile
90' 205 gti6 supercharged
05' Evo 9 IX GT

Team eaton.


Axle rebuilds please contact me for your needs.

https://www.facebook.com/axlesbystef/
Reply
Thanks given by:
#87
Stef. just briefly, when sending a beam for refurb, do you need the support arms sent with it, or just the beam tube & trailing arms?
It goes, it stops (as reqd). Makeup
Hate Housework!
Reply
Thanks given by:
#88
i dont need the support arms, but due to how they are bolted in standard form you can not remove them unless the beam is standard height you might get them off.
90' 205 gti6 supercharged
05' Evo 9 IX GT

Team eaton.


Axle rebuilds please contact me for your needs.

https://www.facebook.com/axlesbystef/
Reply
Thanks given by:
#89
thanks. the beam will be off the car for that then.
It goes, it stops (as reqd). Makeup
Hate Housework!
Reply
Thanks given by:


Forum Jump:


Users browsing this thread: 3 Guest(s)