Matts daily budget stage 1+ HDi LX.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Matts daily budget stage 1+ HDi LX.
#31
I would, obviously in my useless opinion, say that going from a HDi 306 to a ford 1.8 is a rather big jump backwards!!
Wishes for more power...
Reply
Thanks given by:
#32
Its a jump that should never be made. It's less powerful, more noisy and somehow less economical than the equivalent petrol engine.
Reply
Thanks given by:
#33
probably partly because the focus 2 and 3 weigh so much.
need a part number? http://public.servicebox.peugeot.com/ and http://service.citroen.com/ will sort you out.
Reply
Thanks given by:
#34
(06-01-2015, 08:03 PM)welshpug Wrote: why else would they ditch it for a DW engine eh Big Grin

emissions and price / availability.... same reason every manufactuer changes engines.

Look at the amount of diesel focus's about and the fact there are no major horror stories with them besides usual wear & tear.. No DPF and no dual mass makes for cheaper maintenance.

I also like how the only people here with ACTUAL experience of these engines support them. piggy dum and welshy just hate anything thats non peugeot lol
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
Reply
Thanks given by:
#35
Woah woah woah!

What do you know about my experience of them?

I've serviced these, rebuilt these and have two friends with these motors in their cars which I maintain.

Hateful old engine. Derived from the old enduraE 1970s 1.8. Maybe different in many ways...but still derived from that original old clattery bag of bolts!
Wishes for more power...
Reply
Thanks given by:
#36
I just assumed from your really vague hateful comments that you were just following the crowd.

So you havent had any horror stories then?
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
Reply
Thanks given by:
#37
My old man had the old variant 1.8D endura engine. Done over 100k in it, I remember before it went to the sky it had 201k on it and it still ran (typical ford tin worm). Those old engines needed a good battery on them to start lol

Darren had on in his field van, believe he seized it once or twice along with cooking it.

Would happily jump in one today and drive it wherever.
Reply
Thanks given by:
#38
Yeah, no horror stories.

More basic and rough than a xud imo

Just cant see any plausable reason to buy one if I had the choice...esp over a hdi or xud
Wishes for more power...
Reply
Thanks given by:
#39
Out of interest, why the 1.8 not the 2.0? I know the 2.0 is based on an old HDi but don't let that put you off, its come on a long way since. Itwasntme lol

If I was buying again is probably have hone for the 2.0 tbh....
Reply
Thanks given by:
#40
Just like your hatred of XUDs for unfounded reasons... Pot kettle!!

A 1.8TDCi is frankly less refined and more unreliable... The engine block itself is fine, but shame they put possibly one of the wankest commonrail systems on it which randomly shit injectors - and yes, I do know a few of these ACTUALLY happening.

It's true that it is derived from the old Endura, but if we're going by that, Tom's 1.6 Focus is based upon a 106 nad engine and my Volvo is based upon a 1970s Indirect injection diesel... The RCZ-R 1.6 turbo engine is essentially based upon the engine out of a 205 Automatic if we're getting really technical Also I'll point out if you go and buy a Range Rover Evoque, they use an engine that is derived from the XUD.
(16-05-2016, 10:45 AM)Toms306 Wrote: Oh I don't care about the stripped threads lol, that's easily solved by hammering the bolt in. Wink
Nanstone GTD5 GT17S - XUD9TE
Volvo V50 D5 R-Design SE Sport - Daily cruise wagon.
Reply
Thanks given by:
#41
My hatred of XUD's is founded on personal experience of working on them and owning several myself.

Most engines can be traced back a LONG way if being pedantic.

Interested to hear more about the tdci injector problems though? genuine interest
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
Reply
Thanks given by:
#42
My uncle in law has run the 1.8 tdci mark 1 focus for 150k and it's still all good. Considering having it off him tbh but he wants to much for it!

The mark 1 focus handles well as well I don't think you'll be disappointed mate. Let the haters hate
CLUB RALLYE
||AVO Race GTX Coilovers||Signature Blue Steels||P1 VTS Rack||Hybrid ARB||21mm Torsion Bar||rich_w Flywheel||
Reply
Thanks given by:
#43
I had a 1.8 tddi mk1 focus as a stop gap and although it wasnt amazing, it worked and did everything i asked.
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
Reply
Thanks given by:
#44
TBF The TDDis are absolutely fine, agricultural as f*ck, couldn't pull the skin off a rice pudding, but reliable as sin.

The CR TDCis I've seen countless times have injector faults, same kinds of problems as the 2.0 camchain in the Mk3 Mondeo has.. They just seem to randomly stop working one day, I can only assume it's due to burnt coils or similar.
(16-05-2016, 10:45 AM)Toms306 Wrote: Oh I don't care about the stripped threads lol, that's easily solved by hammering the bolt in. Wink
Nanstone GTD5 GT17S - XUD9TE
Volvo V50 D5 R-Design SE Sport - Daily cruise wagon.
Reply
Thanks given by:
#45
TDDI is reliable as anything but is completely no thrills!

Tbh i can live with having to replace a few injectors. cheers for the heads up though ruan
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
Reply
Thanks given by:
#46
(07-01-2015, 02:48 PM)Matt-Rallye Wrote: TDDI is reliable as anything but is completely no thrills!

Tbh i can live with having to replace a few injectors. cheers for the heads up though ruan

Heh, though they're coded from memory, hence the issue...

You can't just ram spares in like a HDi..
(16-05-2016, 10:45 AM)Toms306 Wrote: Oh I don't care about the stripped threads lol, that's easily solved by hammering the bolt in. Wink
Nanstone GTD5 GT17S - XUD9TE
Volvo V50 D5 R-Design SE Sport - Daily cruise wagon.
Reply
Thanks given by:
#47
(07-01-2015, 03:23 PM)Ruan Wrote:
(07-01-2015, 02:48 PM)Matt-Rallye Wrote: TDDI is reliable as anything but is completely no thrills!

Tbh i can live with having to replace a few injectors. cheers for the heads up though ruan

Heh, though they're coded from memory, hence the issue...

You can't just ram spares in like a HDi..

Ah that does make for a ballache if thats the case!

I'll perform a google on the matter
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
Reply
Thanks given by:
#48
You can recode them with an ELM cable and free software though.

There is a bad batch of 1.8 injectors, so its more common on a certain year (which I cant remember off the top of my head!) but does seem to happen reasonably often - though not as often as DV6s popping turbos lol. Don't know if you're on FordOwnersClub.com but theres plenty of info over there.
Reply
Thanks given by:
#49
no dmf? who told you that? the one a friend had from new in 2009 did have one.
need a part number? http://public.servicebox.peugeot.com/ and http://service.citroen.com/ will sort you out.
Reply
Thanks given by:
#50
(07-01-2015, 05:07 PM)welshpug Wrote: no dmf? who told you that? the one a friend had from new in 2009 did have one.

2003 focus 1.8TDCI does NOT have a DPF. i can imagine a 2009 one would. but im looking at a mk1 focus, none of which were fitted with DPF
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
Reply
Thanks given by:
#51
DPF and DMF are different things matt Tongue
Wishes for more power...
Reply
Thanks given by:
#52
All 1.8 TDCis have a DMF, and they're a weak point on that engine. None have a DPF, the engine was just dropped for the Mk3.
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  Matts cheap cherry rallye Matt-Rallye 15 7,144 02-01-2018, 08:45 AM
Last Post: Matt-Rallye
  Budget GTI-6 Track Build paulgtt 16 5,647 17-09-2017, 08:47 AM
Last Post: Magenta Sunset
  Matts Cherry HDi Dturbo. Project Stage 1+ & tidy up. Matt-Rallye 29 12,884 10-05-2017, 12:49 PM
Last Post: Poodle

Forum Jump:


Users browsing this thread: 1 Guest(s)