+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: Breaking - Supercharged XUD :( (/showthread.php?tid=29277)
Pages:
1
2
Breaking - Supercharged XUD :( - londondan86 - 16-02-2015
Well here it is
Exhaust manifold, turbo, downpipe - £500 - SOLD
Supercharger, pulley, belt setup, brackets -£400 - SOLD
FMIC, pipework, inlet, fans - £200 - SOLD
11mm pump, lines, injectors - £175 - SOLD
Forged rods - £350 - SOLD
ARP Bolts - £150 - SOLD
Head gasket, head set - £50 - SOLD
Boost gauge - £15 - SOLD
Oil pressure gauge - £15
Oil temp gauge - £15
Double pillar pod - £15 - SOLD
Solid beam mounts - £85
Number plate (P195 PUG) - £250
6 Axle - £50
Coilovers - £60
Brembo Setup - £250 - SOLD
Chrome Injector Lines - £35 - SOLD
Nissens Rad - £40
White Challengers (new tyres on all 4) - £300
Exhaust - £70 - SOLD
Good working engine with piper cam - £150
Spare engine in bits - £40
Gearbox - £30
Front bumper - £30
Body panels - £20
Bonnet, grille - £50
BLack masks - £30
Dump valve - £30
Polished fusebox cover, power steering cover - £40 - SOLD
Hubs with new bearings (16mm) - £35
Alloy header tank - £30 - SOLD
Etech strut brace - £40 - SOLD
OMP Strut brace - £30 - SOLD
Tinted rear lights - £20
Wind deflectors - £20
All prices are collection only. I will be willing to post or you sort out a courier for the larger items i can put stuff on pallets
RE: Breaking - Supercharged XUD :( - ginge191 - 16-02-2015
Goddddamn
i know you don't want this thread spammed, but damn!If only this was MOT'd :'( GL with it all mate
BUT upper strut brace; dibs if it fits a '6
RE: Breaking - Supercharged XUD :( - londondan86 - 16-02-2015
(16-02-2015, 06:15 PM)ginge191 Wrote: Goddddamn
If only this was MOT'd :'( GL with it all mate
BUT upper strut brace; dibs if it fits a '6
Buy it and MOT it!!!!!!
Yea strut brace will fit any 306
RE: Breaking - Supercharged XUD :( - ginge191 - 16-02-2015
(16-02-2015, 06:18 PM)londondan86 Wrote:(16-02-2015, 06:15 PM)ginge191 Wrote: Goddddamn
If only this was MOT'd :'( GL with it all mate
BUT upper strut brace; dibs if it fits a '6
Buy it and MOT it!!!!!!
Yea strut brace will fit any 306
Both braces (Etech and OMP) upper?
RE: Breaking - Supercharged XUD :( - londondan86 - 16-02-2015
Yea both upper. The omp has a little paint flaking which is why it is cheaper but metal is fine, was going to get it powder coated and use that instead
RE: Breaking - Supercharged XUD :( - ginge191 - 16-02-2015
(16-02-2015, 06:26 PM)londondan86 Wrote: Yea both upper. The omp has a little paint flaking which is why it is cheaper but metal is fine, was going to get it powder coated and use that instead
Will PM you
RE: Breaking - Supercharged XUD :( - ct-hdi - 16-02-2015
What kind of exhaust is it? Is it all in one piece or does it separate? Interested in that and the black masks
RE: Breaking - Supercharged XUD :( - londondan86 - 16-02-2015
Exhaust is one piece mate but could cut it in half for you? Masks provisionally sold
RE: Breaking - Supercharged XUD :( - silverzx - 17-02-2015
What brand/condition are coil overs?
RE: Breaking - Supercharged XUD :( - zx_volcane - 17-02-2015
Do you have a photo of the expansion tank please?
RE: Breaking - Supercharged XUD :( - darrenjlobb - 17-02-2015
Do you have any photos of the brembos chap?
Also if you were interested I would be interested in the rear calipers off the rear beam if there all good...Dont worry if you want to keep it all complete though understand that.
RE: Breaking - Supercharged XUD :( - londondan86 - 17-02-2015
I'll update later guys few things sold today but won't affect the above questions.
RE: Breaking - Supercharged XUD :( - londondan86 - 17-02-2015
Turbo setup, arp bolts, 11mm pump & Head gasket set all sold pending payment
I'll get photos of the brembo calipers later Darren and yes I'll be happy to sell the rear calipers separate from the beam. Rear disks are good and have new rear pads which can all be included too if needed
ZX - expansion tank is the same as this one which is A LOT cheaper than when I bought it!! Yours for 25 posted? I'll get a pic later anyway
Not sure on the brand of coilovers but I suspect they are TA's but yea good nic and had new bearings when they went on
RE: Breaking - Supercharged XUD :( - hovis16 - 17-02-2015
what colour code. Very interested. Oh i was up you way on sunday for work as well
RE: Breaking - Supercharged XUD :( - darrenjlobb - 17-02-2015
Cheers for that Dan,
Ideally id just be after the bare calipers, as I dont fit brakes without new discs and pads in general, and will save massively on the postage
Quote me up on front / rear brakes
/ PM if you preferI almost want to buy my old manifold and stuff back just to put an old XUD back together and wind right up just for old times sakes / some development time on the dyno and could likely see what the old girl was really making!
Hope it all goes to a good home though!
RE: Breaking - Supercharged XUD :( - londondan86 - 17-02-2015
[attachment=21699]
[attachment=21698]
[attachment=21700]
(17-02-2015, 07:42 PM)hovis16 Wrote: what colour code. Very interested. Oh i was up you way on sunday for work as well
Colour is P0XY mate
RE: Breaking - Supercharged XUD :( - londondan86 - 18-02-2015
First post updated. Pics of everything will follow in Friday when the car comes apart
RE: Breaking - Supercharged XUD :( - Frosty - 18-02-2015
So many bits i would of loved to buy, wish i had the spare money
RE: Breaking - Supercharged XUD :( - londondan86 - 18-02-2015
Always the bloody way chap!!! Lol
Breaking - Supercharged XUD :( - td_dan - 18-02-2015
What gauges mate? Does it inc all the sensors?
RE: Breaking - Supercharged XUD :( - Piggy - 18-02-2015
dan got in before me...what gauges and mounts? Very interested.
RE: Breaking - Supercharged XUD :( - londondan86 - 18-02-2015
Gauges, there's 2 boost, 1 egt , 1 oil temp and 1 oil pressure. Senders will be included with the relevant gauge. 75 for the lot or 15 each
Sandwich plate 15 quid but may come to a deal with the gauges. Also have the pods for sale, double pillar for 20 quid triple custom centre for 20 as well
Piggy, is it the beam mounts your after chap?
RE: Breaking - Supercharged XUD :( - Piggy - 18-02-2015
Ah I meant gauge mounts/pods
Breaking - Supercharged XUD :( - td_dan - 18-02-2015
Ok how much for everything, gauges, senders, sandwich plate and holders delivered to birmingham
pm if its easier Piggy pods are yours if you want them
just need gauges and everything attached
RE: Breaking - Supercharged XUD :( - londondan86 - 18-02-2015
No worries pal.
Let me know if your after anything or want any pictures taking before it gets broken on friday(18-02-2015, 10:26 PM)td_dan Wrote: Ok how much for everything, gauges, senders, sandwich plate and holders delivered to birmingham
Piggy pods are yours if you want them
5 mins pal, I'll pm you
RE: Breaking - Supercharged XUD :( - Piggy - 18-02-2015
Are they solid rear mounts fella??
RE: Breaking - Supercharged XUD :( - londondan86 - 18-02-2015
(18-02-2015, 10:48 PM)Piggy Wrote: Are they solid rear mounts fella??
They are indeed! Complete 4 piece set
RE: Breaking - Supercharged XUD :( - Piggy - 18-02-2015
Price? Save me welding up a set!
RE: Breaking - Supercharged XUD :( - londondan86 - 18-02-2015
(18-02-2015, 10:54 PM)Piggy Wrote: Price? Save me welding up a set!
Pm'd
RE: Breaking - Supercharged XUD :( - londondan86 - 19-02-2015
Gauges all sold pending payment. Pods still available