+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: f*ck !!! Shall I fit this pump? (/showthread.php?tid=22909)
Pages:
1
2
f*ck !!! Shall I fit this pump? - devils_fuel - 05-04-2014
At Zachs and we've looked at my refurbed Bosch pump and the courier has done this to it !!! Can it still be fitted or has it had it???
![[Image: quva8eju.jpg]](http://img.tapatalk.com/d/14/04/05/quva8eju.jpg)
RE: f*ck !!! Shall I fit this pump? - Piggy - 05-04-2014
I am SOOOO not happy about this....
on phone to courier now
RE: f*ck !!! Shall I fit this pump? - Jonny81191 - 05-04-2014
should be ok, as long as the other three are done up tight. But you ideally need them all.
RE: f*ck !!! Shall I fit this pump? - Piggy - 05-04-2014
(05-04-2014, 11:59 AM)Jonny81191 Wrote: should be ok, as long as the other three are done up tight. But you ideally need them all.
What I was thinkin, I only run three, two at cambelt end, one at bottom corner
RE: f*ck !!! Shall I fit this pump? - Jonny81191 - 05-04-2014
and you could wind the nut on, it'd hold it a bit
In fact, get a quote from a welder to fix it, bearing in mind it'd have to be stripped bare, then get the courier to pay it.
Then take the money and fit it anyway
RE: f*ck !!! Shall I fit this pump? - Teddy - 05-04-2014
what firm was it as i posted a pump as bashed to f*ck snapped the pully off it
that was sent with ups
![[Image: 10007407_667195713342269_1598691901_n_zps77a50ee9.jpg]](http://s1345.photobucket.com/user/Teddy_Haslam/media/10007407_667195713342269_1598691901_n_zps77a50ee9.jpg.html)
![[Image: 1926852_667195726675601_435213148_n_zps23a8df74.jpg]](http://s1345.photobucket.com/user/Teddy_Haslam/media/1926852_667195726675601_435213148_n_zps23a8df74.jpg.html)
RE: f*ck !!! Shall I fit this pump? - Piggy - 05-04-2014
Ive sent one with myhermes and they snapped the pulley, so I used a 24hr Yodel option this time.
Not happy
RE: f*ck !!! Shall I fit this pump? - Tom - 05-04-2014
Oh no
RE: f*ck !!! Shall I fit this pump? - Paul_13 - 05-04-2014
Avoid yodel like the plague!
RE: f*ck !!! Shall I fit this pump? - Daniel306 - 05-04-2014
Id weld that lug back on without striping the pump, just do it in stages
RE: f*ck !!! Shall I fit this pump? - ginge191 - 05-04-2014
Liquid metal it back, be reet..
RE: f*ck !!! Shall I fit this pump? - Matt - 05-04-2014
sheeeet! thatll be fine though as said. id use a bfo washer to grip the pump. but i am a pikey
RE: f*ck !!! Shall I fit this pump? - Chris_90 - 05-04-2014
Big washer I'm sure it be ok, was it Hermes that post by? Had a box squashed to hell
f*ck !!! Shall I fit this pump? - Razorback_Rob - 05-04-2014
Couldn't believe how careless they are when I saw it. Hopefully you guys finish the job off tomorrow quick
f*ck !!! Shall I fit this pump? - devils_fuel - 06-04-2014
%**<%€ %**><#> ^#>$$> ^+€>+>>. RANT OVER !
Piggy....would you be up for rebuilding my pump again if I can get another casing?
Zach told me he'd fit it once you've rebuilt it
RE: f*ck !!! Shall I fit this pump? - Piggy - 06-04-2014
So not guna fit this one?
Is it not worth zach doing it to avoid stupid couriers again?
Ive put in a claim with the courier....see what happens. Wonder if someone has a bare casing going cheap/for bear tokens???
RE: f*ck !!! Shall I fit this pump? - Danny2009 - 06-04-2014
I've got a f*cked Bosch depends how quick you need it?
Don't have much luck with posting pumps piggy :/
RE: f*ck !!! Shall I fit this pump? - Piggy - 06-04-2014
No. I dont.
Its why I used a different courier this time!!
RE: f*ck !!! Shall I fit this pump? - Matt - 06-04-2014
Teddy had an empty Bosch iirc
RE: f*ck !!! Shall I fit this pump? - Teddy - 06-04-2014
i have a empty casing chap if u after 1
f*ck !!! Shall I fit this pump? - devils_fuel - 06-04-2014
Thanks chaps, how much chaps?
RE: f*ck !!! Shall I fit this pump? - Piggy - 06-04-2014
Ozone said he may have one mate...worth checking with him first...esp as he has the original
RE: f*ck !!! Shall I fit this pump? - Teddy - 06-04-2014
£15 posted
f*ck !!! Shall I fit this pump? - devils_fuel - 06-04-2014
(06-04-2014, 08:30 PM)Piggy Wrote: Ozone said he may have one mate...worth checking with him first...esp as he has the original
Good call, pm sent
(06-04-2014, 08:43 PM)Teddy Wrote: £15 posted
Thanks mate, hopefully I'm sorted but if not I'll pm you
RE: f*ck !!! Shall I fit this pump? - Ruan - 08-04-2014
Seriously, it'll be fine, just make sure all the others are done up, that end of the pump locates into the pump bracket anyway due to the register on the nose, as long as you've got two on you'll be fine.
I wouldn't say it's worth the hassle of stripping and rebuilding the pump, unless you intend to reseal and put new vanes in.
RE: f*ck !!! Shall I fit this pump? - silverzx - 08-04-2014
Err, am I the only one thinking it should of been packaged better..
RE: f*ck !!! Shall I fit this pump? - Piggy - 08-04-2014
(08-04-2014, 12:40 PM)silverzx Wrote: Err, am I the only one thinking it should of been packaged better..
Other than wrapping it in a duvet, not sure how much more packaging I could have used
RE: f*ck !!! Shall I fit this pump? - devils_fuel - 08-04-2014
(08-04-2014, 12:26 PM)Ruan Wrote: Seriously, it'll be fine, just make sure all the others are done up, that end of the pump locates into the pump bracket anyway due to the register on the nose, as long as you've got two on you'll be fine.
I wouldn't say it's worth the hassle of stripping and rebuilding the pump, unless you intend to reseal and put new vanes in.
this pump was refurbed for me hence i am really p*ssed! Zach said its not worth fitting as its the cam side top one which is most movement from the pump happens + there isnt anythning for the stud to remotely grip to
I may just get it reshelled
(08-04-2014, 12:40 PM)silverzx Wrote: Err, am I the only one thinking it should of been packaged better..
it was very well wrapped mate
RE: f*ck !!! Shall I fit this pump? - Piggy - 08-04-2014
Tbh, if Ruan says its ok, its ok.
He had I'm sure fitted more of these than I have had hot dinners
RE: f*ck !!! Shall I fit this pump? - Alex - 08-04-2014
I wouldn't put that pump back on the car.
I once ran mine on three bolts (couldn't be ar5ed to tighten the bottom front one up) and it ended up coming loose, the other two studs snapped, the taper bolt went on holiday and the pump was held in place by the pipes. The mounting bracket also ended up being changed as the hole had elongated into an oval.
Don't do it wrong, do it right and do it once.